1. Cut short sorghum: Straw, sweet potato vine, grass, hay, vegetables, straw, etc., must be shortened before they can be used to feed livestock. The straw that feeds the cow should be cut into 2 to 3 cm; the cabbage that is fed to the pig is cut into 1 to 2 cm; the sweet potato cane is made to be about 1 cm. Generally should not be short to long, in order to achieve the "three-inch cut grass, no material also Shangyu" feeding effect. If impurities, sediment, etc., should be washed and sieved.
2, smash help digestion: food (grain), sweet potato, cassava and other feed, must be crushed and then feed to help digestion. The degree of crushing should be based on the type of feed and livestock. Pigs, cattle feed can be crushed or medium or coarse particles 1-2 mm; chicken material should be ground into a powder. Sweet potatoes and cassava can be cut into slices and dried before they are crushed, and sweet potatoes can also be fed by beating.
3, soaking so that softening: corn, wheat, sorghum, soybean cake and other feed, it is best to feed with light salt and boiling water before soaking some time, so that soften and then feed, both to save feed, but also easy to digest, livestock and poultry to eat. General material, water ratio is 1:2. The length of the soaking time should be determined according to the season and the type of feed, and the hot weather soaking time in summer should be short to prevent deterioration of the feed.
4, cooking and adjusting the taste: beans, peas and soybeans, grain feed, it is processed by cooking modulation. Practice has shown that soybeans have been cooked and destroyed anti-trypsin in soybeans, increased palatability, improved digestibility and nutritional value; at the same time increased the effective methionine and cystine in soybean protein, increased the biological value of the protein . However, cooking time should not be too long, usually about 50 minutes.
5, roast crisp sweet: Roasting is mainly a way to feed the piglet processing modulation concentrate. The grain feed, especially the cereal grain feed, passes through a high temperature furnace at 130-150°C for a short period of time. Some of the starch is converted into dextrin, which improves the utilization of starch and eliminates harmful bacteria. The feed is sweet, delicious and crispy. Increase appetite, good feeding effect.
6, silage preservation: the green material stored in a variety of pits, pools, tanks, fermentation under anaerobic conditions, generate lactic acid. It can ensure the nutrients in green feed and improve the utilization and digestibility of green feed. It is also an effective measure to regulate the green season and off-season shortage, and supply the off-season green sweat feed.
Printing Glow In Dark Tape
1. Material and classification of glow in dark tape
We have PET material glow in dark tape and PVC material glow in dark tape. PET material is cheaper but not printable. PVC material support customized printing with low MOQ.
For both materials, we have different kinds according to the glowing time it can last after full charging (0.5hours charging at least). We have 2hours, 4hour, 6hours, 8hours and 10hours according to the glowing period it can last.
2. Colors for choosing
We have light green, pink, orange, red, blue, white for choosing.
3. Features
a. Good ahesion, we use solvent acrylic adhesive, the adhesive is strong and long lasting.
b. Waterproof. Both PET and PVC material are waterproof. Can used for both indoor and outdoor usage.
c. Long service life: 2~3 years even for outdoor usage.
d. Different sizes for choosing: 1.24m x 45.7m log roll, or other customized sizes such as 25mm/ 50mm x 5meters/ 10yards/ 10meters/ 18meters, etc.
e, Accept die cuting to small pieces such as dots, stars, arrows, etc,
Printing Glowing Tape,Printing Glow In Dark Tape, Customized glow in dark tape, customized luminous tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com