The turbo crusher is mainly used to crush the material between the tooth plate and the movement, and also uses the vortex flow generated by the back of the knife to strengthen the crushing of the material. If the material is low in heat sensitivity, it can be equipped with a cold air circulation cooling device (temperature can be controlled at 20-30 degrees) or a deep cooling device (temperature can be controlled between -4,510 degrees). This device is used in biopharmaceutical or frozen crushing. use.
So now we have the following items from 9:00 look at the operation of the turbo mill should be noted: 1, before using turbo mill, first check whether the machine tighten all fasteners, belt is tensioned.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the electrical equipment of the turbo crusher is complete.
4. Check whether there are any hard objects such as metal in the crushing room of the machine. Otherwise, the tool will be damaged and the machine will be affected.
5. The material must be checked for purity before crushing. Metal hard materials are not allowed to be mixed in, so as to avoid damage to the tool or cause burning.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Regularly check whether the cutter of the turbine mill is damaged with the screen. If it is damaged, it should be replaced immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
Turbine crusher is mainly used in the pharmaceutical, chemical, food, pesticide, building materials and plastics industries, Mohs hardness is less than 3, soft, brittle and fibrous materials. Such as medicinal materials, dyes, pigments, food additives and plastic additives, etc., have achieved satisfactory comminution effects.
So now we have the following items from 9:00 look at the operation of the turbo mill should be noted: 1, before using turbo mill, first check whether the machine tighten all fasteners, belt is tensioned.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the electrical equipment of the turbo crusher is complete.
4. Check whether there are any hard objects such as metal in the crushing room of the machine. Otherwise, the tool will be damaged and the machine will be affected.
5. The material must be checked for purity before crushing. Metal hard materials are not allowed to be mixed in, so as to avoid damage to the tool or cause burning.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Regularly check whether the cutter of the turbine mill is damaged with the screen. If it is damaged, it should be replaced immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
Turbine crusher is mainly used in the pharmaceutical, chemical, food, pesticide, building materials and plastics industries, Mohs hardness is less than 3, soft, brittle and fibrous materials. Such as medicinal materials, dyes, pigments, food additives and plastic additives, etc., have achieved satisfactory comminution effects.
NINGBO YOUHE MOTHER&BABY PRODUCTS CO.,LTD , https://www.youha.com