Cultivation technique of mulching with 46 cloves of garlic

1. Seed preparation

Choose Yongnian four or six white garlic varieties. When preparing the seeds, choose large, neat, hard, no bruises, mildew, white, and uniform garlic cloves.

2. Soil preparation and fertilization

It is recommended to return straw to the field, which can reduce the amount of fertilizer applied, but also make the soil mellow and facilitate the growth of garlic. Because garlic is covered with plastic film for life, it is necessary to apply foot fertilizer once. Specifically, apply 50-70 kilograms of high-quality compound fertilizer per mu, 250 kilograms of high-efficiency organic fertilizer, or 5-10 cubic meters of decomposed farmyard manure, and mix it with high-quality boron, magnesium, zinc, and iron each with 1 kilogram, and then sprinkle it on the field. After being placed for 5-7 days, sowing.

Three, sowing and filming

Garlic planting is generally planted from late September to early October, at the right time between the autumnal equinox and cold dew. Too late will cause the garlic seedlings to be weak and not conducive to safe overwintering, and it is also easy to cause the garlic to form a single garlic that cannot produce garlic sprouts due to poor growth during the overwintering period, which will reduce production and affect income. Before planting, use columbine to draw three trenches with a depth of about 6 to 8 cm according to the row spacing of 20 cm. Insert the garlic cloves into the trench and cover with soil at a distance of 7 cm. Each border has 12 rows and can cover 3 lanes. Membrane (film width is 90 cm, thickness is 0.05 mm). After all the garlic seeds are planted, level the garlic border. After pouring the masking water, spray the garlic herbicide and cover the film.

Fourth, garlic field management

Garlic usually begins to break the soil and sprout 5-8 days after covering the membrane. When observing the germination rate of garlic under the membrane is about 60%~70%, it can be pushed forward with a homemade brush to help the garlic sprout to break the membrane in a timely manner. In some cases, it can be broken manually. Membrane (use a self-made tool with a hook to hook out the garlic buds nestled under the membrane). After the seedlings grow to 20-25 cm high, 100 grams of Jintailong per mu is sprayed on 15 kg of water to lay a solid foundation for the safe overwintering of garlic seedlings. Antifreeze water should be poured before overwintering, and the antifreeze water should be watered after 4 to 5 consecutive days after the night and day disappear. Choose fine weather from 9 am to 3 pm.

Five, cover double film

Choose the width of the film reasonably according to the width of the garlic plot (the width specifications of the garlic film are 4.3 meters, 4 meters, 3, 5 meters, 3 meters, etc.), and prepare the covering utensils, which can be sawed by bamboo poles or branches A 0.3-meter long stick requires about 1,000 sticks per mu. Prepare some plastic ropes for 1 to 1.5 kilograms per mu. Check the garlic field before covering the film. Use wire hooks to hook out the garlic seedlings that have not come out of the film. Then, in heavy snow, the temperature drops below 0°C for continuous 3~ Cover with two layers of film after 5 days. When covering the double film, you should choose to start after 9 a.m. when the weather is fine. Place the film on the ground and press it evenly on the film to fix it, and then use a plastic rope to tie the bamboo pole into 2/3 of the bamboo pole. Put the film into the ground and fix it at the same time, fix one at a distance of 1 meter until it is placed on the ground, and then take the soil and press it. Note that the width of the overlapped part of the membrane and the membrane should not be less than 0.3 meters. Below this value, it will be blown up by the wind and affect the safe overwintering of garlic.

Six, spring management

After the spring begins, water back to green water in mid-March, and apply 10-15 kg of high-quality compound fertilizer per mu with water. It will be repeated every 12 days in the future. In mid-April, 1 kg of 48% phoxim plus 100 ml of 1.8% abamectin will be used to control underground pests.

Seven, timely harvest

Stop watering the garlic sprouts 5 days before harvest. After the garlic sprouts are harvested, they should be watered and topdressed with 10 kg of potassium fertilizer to promote the enlargement of the garlic and improve the quality. Garlic is harvested about 12 days after watering and fertilization, and it is sorted and stored in the air for 8-10 days after harvest.

Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone

Inline Flat Drippers

Shandong Chunyu Water-saving Irrigation Equipment Co., Ltd., founded in 2011, is located in Laiwu High-tech Zone, Jinan City. It is a high-tech enterprise focusing on innovative and efficient emitter mold manufacturing and emitter product research and development and production. After nearly ten years of innovation and development, it is the invisible champion enterprise in Shandong Province, and now it is in a leading position in this field in China.

Spring rain people-oriented, build talent highland. At present, the company has 16 high, fine and advanced technical personnel, and cooperates with a number of scientific research institutes, forming a mold design, emitter testing, flow testing and other professional technical personnel team. In recent years, it has obtained 3 invention patents, 33 utility model patents and 3 patent awards. In 2019, it was identified as an intellectual property advantage enterprise in Jinan. It has undertaken 4 provincial science and technology innovation projects and won 2 second prizes of Shandong Science and Technology Progress Award. The company has built Jinan drip emitter mold engineering technology research center, the company has a slow wire cutting, CNC machining center, precision EDM machine, 3D projection measuring instrument, CNC engraving, laser engraving and other advanced processing equipment. Mature technology and rich experience support the excellent quality of Chunyu. Spring Rain pays attention to every link of production, implements 8S management, strictly controls the quality of products at the beginning, the middle and the end, and forms the seamless link of production management. The company has independently researched and developed flat emitter molds with full hot runner, cylindrical emitter molds with full hot runner and other products. With excellent quality, competitive price and good after-sales service, the company is well known at home and abroad, and has been sold well in Egypt, India, Iran, Turkey, Saudi Arabia, the United States and other countries.

With the vision of "building a global professional emitter mold supplier" and the mission of "providing solutions for efficient and innovative production of global water-saving irrigation enterprises", the company takes "scientific and technological innovation to scale new heights; Keep improving, the pursuit of excellence; Honesty and trustworthiness, win-win cooperation "for the values of the enterprise. For the construction of water - saving and resource-saving society to make a positive contribution.

Inline Flat Drippers,Hydrodrip Flat Drippers,Irrigation Agriculture Flat Dripper,Inline Flat Dripper For Greenhouse

Shandong Spring Rain Water Saving Irrigation Equipment Co.,Ltd. , https://www.drippermould.com