1 Frequent replacement of wearing parts improves equipment performance. Develop the habit of constantly inspecting the key parts of the mower and replace the parts as needed. Pay special attention to the engine and the blade, and the damaged blade may cause safety hazards during work. When necessary, consider replacing the fuel filter, spark plug, and air filter of the equipment, and cleaning the air filter at times.
2 Thoroughly clean the mower bottom, deck, and fuel cap. Before performing any maintenance, remove the spark plug wire and opening device and remove the accumulated impurities from the landing gear and deck with a hose, putty knife, and car wash. The fuel tank cover is provided with a vent hole, this is for the air to enter the fuel tank, with the brush to scrape off the deposited particles on it to prevent the air hole blocking. Then close the fuel tank cap and check for obstruction. If it does, replace the fuel cap.
3 Remove grease. First spray the degreaser on the place where the equipment is oily. Let it stand for 10 minutes to 15 minutes. Allow the degreaser and oil to fully react. Then wipe it clean with a towel and rinse it thoroughly with a water hose.
4 Spray the bare part of the mower with spray lubricant to prevent rusting of the equipment parts.
Waist massager
Waist massager
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizon.com