Rabbit fur rabbit hair is a high-grade raw wool material, rabbit wool fabric has a light, soft, warm, beautiful features. According to the type of fiber, rabbit hair can be divided into three kinds of coarse hair, fine hair, and two types of hair. Among them, the two types of hair have lower textile value. (A) The collection of rabbit hair. There are two kinds of collection methods, namely pulling and shearing. There are two kinds of pull hair: stretch short and pull light. The method of lengthening and shortening helps to improve the quality of rabbit hair and is beneficial to the freezing and cold protection of rabbits. The most suitable for the spring and autumn moulting season, generally 30 to 40 days to pull once. Pulling light is usually about 80 days after the 2-month-old rabbit cuts off the lint, and removes all of its hair from the head, tail, and extremities. Handle it gently with a small amount of hand, and do not pull it hard to avoid damaging the skin. The shearing method for collecting rabbit hair is commonly used in rabbit hair production. The procedure is to cut the back first, then cut the side of the body, and then cut the hair of the head, limbs and abdomen. (B) the classification of rabbit hair. The classification of rabbit hair is based on the requirements of “long, loose, white, and cleanâ€. “Long†means that the hair length reaches the acquisition grade standard; “loose†means that hairy pine does not agglomerate; “white†means that the color is white; “net "There is no impurity. (c) Storage of rabbit hair. Rabbit hair has strong adhesion and hygroscopicity, and is easily affected by physical and chemical factors. Improper storage can cause agglomeration, yellowing, and brittleness, as well as insect infestation. If rabbit hair is not sold for a short time, it can be stored for a short period of time by selecting a well-dried container with a thin layer of dry lime on top and then covering it with paper. Place a skullcap attack (containing 3 to 4 mothballs) in each of the four corners and the center of the container, then place the rabbit hairs in layers, each layer is about 20 centimeters thick, put a layer evenly on each layer, and put evenly on each one. Head until full, cover kept. At regular intervals (not more than 1 month), check for a sunny day. If it is found that the rabbit hair is wet, the rabbit hair should be sunned for 1 to 2 hours and then moved to a dry and ventilated place to dry; if there is no change in the rabbit hair, only the top cover can be opened for 2 to 3 hours. Rabbit skin rabbit skin can be made of tanning and leather making, especially leather products made from rabbit skin are popular in the international market. Fresh skin peeled off by rabbits was previously called raw hides without being tanned. The raw hides contain a lot of water, protein and fat, which are easily decomposed by bacteria and become spoilage, and need to be cleaned and preserved in time. (a) clean up. After the skin is peeled off, the tendons, mammary glands, and external genitalia are cut off. The inner skin of the skin is stained with fatty deposits and connective tissue. After cooling, use a knife to scrape from the buttocks to the direction of the head. Do not reverse the scraping so as not to expose the hair roots. , make the fur "perforation" defects. (b) Anti-corrosion. Anti-corrosion methods are mostly dry. After scraping off the fat and fresh skin, use dry sawdust, talcum powder, rags, etc., to rub the inner skin of the skin until the fat deposits are completely wiped off, then shake off the sawdust and talcum powder, and then put the hairs in the skin towards the inside. The skin plate is mounted on a specially made support and hangs in a dry and ventilated place. It should not be exposed to rain, heat and fire.
Lab Supply Sincalide,Ganirelix Acetate,Peptide Sincalide
Cosmetic Peptides Co., Ltd. , http://www.ns-pharmaceuticals.com