The circulating water vacuum pump, also called the water ring vacuum pump, is a rough vacuum pump. It has an ultimate vacuum of 2000-4000 Pa and a tandem atmospheric injector of 270-670 Pa. The water ring pump can also be used as a compressor, called a water ring compressor, which is a low pressure compressor with a pressure range of 1-2X105 Pascal.
The circulating water vacuum pump was originally used as a self-priming pump, and was gradually used in many industrial sectors such as petroleum, chemical, machinery, mining, light industry, medicine and food. In many processes of industrial production, such as vacuum filtration, vacuum water diversion, vacuum feeding, vacuum evaporation, vacuum concentration, vacuum regain and vacuum degassing, water ring pumps are widely used. Due to the rapid development of vacuum application technology, water ring pumps have been paid attention to in the acquisition of rough vacuum. Since the gas compression in the water ring pump is isothermal, the flammable and explosive gas can be removed, and the dusty and water-containing gas can be removed. Therefore, the application of the water ring pump is increasing, and the pump body is loaded with an appropriate amount. Water as a working fluid. When the impeller rotates clockwise in the figure, the water is thrown around by the impeller. Due to the centrifugal force, the water forms a closed ring of approximately equal thickness depending on the shape of the pump chamber. The inner surface of the lower portion of the water ring is just tangent to the impeller hub, and the upper inner surface of the water ring is just at the tip of the blade (actually the blade has a defined insertion depth in the water ring). At this time, a crescent space is formed between the impeller hub and the water ring, and this space is divided by the impeller into a plurality of small cavities equal to the number of blades. If the lower part of the impeller is used as the starting point, then the impeller is 180 degrees before the rotation, the small cavity area is changed from small to large, and communicates with the suction port on the end face. At this time, the gas is sucked, and when the inhalation is finished, the small cavity is Isolated from the suction port; when the impeller continues to rotate, the small cavity becomes larger and smaller, so that the gas is compressed; when the small cavity communicates with the exhaust port, the gas is discharged outside the pump.
In summary, the water ring pump relies on the change of the volume of the pump chamber to achieve the suction, compression and exhaust, so it belongs to the variable displacement vacuum pump.
The circulating water vacuum pump was originally used as a self-priming pump, and was gradually used in many industrial sectors such as petroleum, chemical, machinery, mining, light industry, medicine and food. In many processes of industrial production, such as vacuum filtration, vacuum water diversion, vacuum feeding, vacuum evaporation, vacuum concentration, vacuum regain and vacuum degassing, water ring pumps are widely used. Due to the rapid development of vacuum application technology, water ring pumps have been paid attention to in the acquisition of rough vacuum. Since the gas compression in the water ring pump is isothermal, the flammable and explosive gas can be removed, and the dusty and water-containing gas can be removed. Therefore, the application of the water ring pump is increasing, and the pump body is loaded with an appropriate amount. Water as a working fluid. When the impeller rotates clockwise in the figure, the water is thrown around by the impeller. Due to the centrifugal force, the water forms a closed ring of approximately equal thickness depending on the shape of the pump chamber. The inner surface of the lower portion of the water ring is just tangent to the impeller hub, and the upper inner surface of the water ring is just at the tip of the blade (actually the blade has a defined insertion depth in the water ring). At this time, a crescent space is formed between the impeller hub and the water ring, and this space is divided by the impeller into a plurality of small cavities equal to the number of blades. If the lower part of the impeller is used as the starting point, then the impeller is 180 degrees before the rotation, the small cavity area is changed from small to large, and communicates with the suction port on the end face. At this time, the gas is sucked, and when the inhalation is finished, the small cavity is Isolated from the suction port; when the impeller continues to rotate, the small cavity becomes larger and smaller, so that the gas is compressed; when the small cavity communicates with the exhaust port, the gas is discharged outside the pump.
In summary, the water ring pump relies on the change of the volume of the pump chamber to achieve the suction, compression and exhaust, so it belongs to the variable displacement vacuum pump.
The valve is a series of gas emergency shut off solenoid valves, specially designed as gas pipe breaker for emergency use. It can be connected with gas leaking detection sensor, fire alarm circuit or other intelligent sensor modules so that on site or remote shut down on gas supply (manually or automatically) is possible, hence ensuring the safety on gas usage. The valve features an auto-close when strong vibration is detected. After close, manual operation is required to turn on the valve. This feature meets safety regulations in the event of an accident.
Cut Off Valve,Solenoid Control Valve,Solenoid Gas Safety Shut Off Valve,Emergency Gas Shut Off Solenoid Valve
Rictron Industrial Co., Ltd , https://www.szrictron.com