Biochemical feed production and precautions

Various crop straws (rice straw, peanut vines, sweet potato vines, corn stalks, etc.), various weeds, leaves, and vines are crushed, and then in the crushed material, biochemical essence water is added to stir and bag, and the fermentation is sealed for a few days. There are sweet and savoury, nutritious, biochemical feeds for livestock and poultry. Biochemicals use chemical methods to break down the physical structure of crude fiber, activate and promote microbial glycolysis, and produce biochemical effects on straw, weeds, leaves, etc. and convert it into low-molecular-weight carbohydrates, free amino acids, and a large number of bacterial proteins. Vitamins. After a series of biochemical crop straws, the average crude protein up to 12% to 15%, organic acids increased nearly 1000 times, lignin degradation of more than 10%, cellulose degradation of more than 20%, hemicellulose degradation of more than 50%. Biochemical feed can be formulated into various biochemical feeds for livestock and poultry by adding a certain amount of energy feed, protein feed, etc.

First, the production of biochemical feed (calculated according to the preparation of 100 kg powder)

1. Raw material crushing Crop stalks, weeds, leaves, etc. are crushed, preferably less than 1.5 mm in size. Weigh 100 kg of mixed powder.

2. Preparation of biochemical solution Take 1 kg of biochemical essence and add 1 kg of warm water of 60°C to 70°C, and stir to dissolve it. Dissolve and pour into 100 kilograms of water, mix evenly, measure the PH value with the test strip, use 12.5~13.0 as appropriate, if the PH value is not enough, can add a certain amount of lime water to adjust. The biochemical solution should be used immediately. Do not store it.

3. Mixing and bagging (or barrels, cylinders, and pools) Add 100 kg of powder to the appropriate amount of biochemical solution, and mix the powder with the amount of water to reach the dough by hand. When the biochemical solution is not enough, add water to modulate. Pack the powder in plastic bags or barrels, ceramic jars, and cement pools, and compact them in layers (in the powder material, use a wooden rod with a diameter of 2 to 3 cm to punch the holes, and drill the holes in the end, with a pitch of 5~ 10 cm, the effect is better).

4. Close the plastic bag tightly after the sealed baking powder is compacted or cover it with a plastic film. The plastic bucket, ceramic jar and cement pool should be tightly sealed. Plastic buckets should be used to cover the plastic lids. The ceramic cylinders must be tightly packed with cylinders with elastic bands. The concrete tanks should be sealed with 20 cm of mud or wet soil on the plastic film. Must be airtight, let it naturally ferment. After 3 days (summer), or 7 days (spring and autumn) or 14 days (winter), when the PH value reaches 4.5 or less and there is a strong wine flavor, it is fermented into a biochemical feed. If used as a commodity feed, it must also be dried or dried.

Second, the matters needing attention

1. Straw can be used once to crush multiple times, requiring raw materials to be non-toxic, non-astringent, and mildew, with at least three or more matching raw materials, and taking into account comprehensive nutrition.

2. When using biochemical feed to prepare biochemical compound feed, it must be prepared according to the requirements of livestock and poultry, and run out according to the temperature within 1~3 days.

3. After the activation of biochemical feed, the rest must be sealed to prevent deterioration.

4. Grass powder, straw biochemical feed due to incomplete nutrition, to be formulated into biochemical compound feed after feeding livestock and poultry, in order to achieve the desired results.

Flavored E-Cigarette

Flavored Electronic Cigarette Vape featured a draw-activated firing mechanism. Pre-filled e juice, small in size, easily put in pocket, Never worry about leakage, more sanitary, does not breed bacteria, it is a perfect pod device for those who are always on the go.

This disposable vape pen built in a 400mAh, 2ml 2% E-liquid, providing 600 puffs. it has six attractive flavors: Tobacco, Ice Cream, Cool Mint, A blend of Mango and Pomelo, Ice Green Bean.


Shenzhen Axiswell Technology Co., Ltd is a manufacturer of no leak electronic cigarette vape with R&D, production and sales team. Our star products are disposable vape pen, closed pod system, vape pods. Our MOQ is low and we provide OEM/ODM service. We understand good taste and reasonable pricing are important for long term cooperation between us and clients. We wish to cooperate with every clients no matter big quantity or small quantity, reaching win-win outcome!



e cigs,disposable e cig,disposable e-cig,disposable electronic cigarette vape,electronic mini cigarette

Shenzhen Axiswell Technology Co., Ltd , https://www.medhealthycare.com