In the autumn, it is necessary to carefully manage the bee colony and adjust the group's potential in time to lay a good foundation for the wintering of bees and the output in the coming year.
1. Yu Xin Wang, winter bee. Grasp the breeding of bee colony, we must promptly put the whole cover honey spleen and empty spleen in the hive, or store it in the box, gradually concentrate the spleen in the nest box, small area on both sides, area Large in the middle, each spleen should maintain about 500 grams of honey. There is no empty spleen in the hive, no new spleen, no measures to expand the hive, keep bee 9 to 10 mm, so that the hive intensive care of the spleen, continue to breed overwintering bees on the basis of the existing spleen.
2. Timely broken whole honeycomb. When the last honey source is terminated, the queen can't grow into a wintering bee even if he continues to lay eggs. To this end, it is necessary to take timely measures to increase the number of bees and reduce the nest temperature. Timely breaks should be performed when there is no spleen so as not to damage the bees. It is also possible to use a king cage with a queen bee shed to keep the bee queen in the king's cage. The worker bees can freely enter and exit through the isolation shed and have direct contact with the queen bee. This can prevent the bees from being trapped and the temperature of the beehive rising. Cover honey and spleen to arrange the hive, with a little more bees than the spleen. If there is no capping spleen, arrange the hive with empty spleen or half empty spleen, replace the spleen without spleen or pollen spleen, and then excrete in the early spring and then add to the bee colony.
3. Make up the winter material, increase the group potential. Generally, mature honey or pure white sugar is used as winter material, and 4 to 5 boxes of bees make up 10 to 13 kilograms of honey, and weak groups make up more to increase the group's potential. When honey is used as winter material, 50 kilograms of honey are added with 3 to 4 kilograms of water, and heated to 70 DEG C in a pot for half an hour to dissolve and crystallize. Winter honey should be kept clean and prevent the mixing of oil and other substances. Use sugar as a winter material, add 50 grams of sugar to 28 to 33 kg of water, heat the water to 100°C, and then put sugar. After the sugar is completely dissolved, it is heated to 100° C., and it is taken out after cooling and supplemented. When feeding, feed them in succession for a short period of time. Do not extend the feeding time to prevent spawning by the queen bee.
4. The spleen is good for the winter. For overwintering bees to maintain bee spleen or bee slightly more than the spleen, do not disparity between the spleen and spleen, because the spleen is not concentrated more bees, bees too much heat, fast consumption. The number of overwintering bees in the outdoors can be slightly more than the number of spleen, 4.5 to 5 boxes of bees put 4 spleen to adapt to climatic conditions. Sealing the honey spleen on both sides of the lid, placing the middle of the lid poorly, and placing the empty nesting room in the middle, is beneficial to clustering the bees and reducing uncapped honey fermentation. Place the outside of the arranged honeycomb with a baffle, cover it with a cover cloth, and cover a few more pieces of paper on the cover cloth to prevent cold air from blowing directly on the hive. In late autumn, bees should be reduced in activity so as not to consume the physical strength of bees and weaken the population of overwintering bees.
Metal base electric Massage Table uses luxurious PU leather, high-density foam, ABS bottom shell, metal chassis, beautiful appearance, generous, fashionable. Three-motor control makes it easy to adjust the back, legs and bed height. The detachable armrest wrapped with a soft sponge is highly practical, highly safe, mechanically simple, and has a very low failure rate. Suitable for use in high-end spa clubs, massage parlours and beauty salons. The motor used in the beauty electric bed is a customized motor for medical devices. It is not a common beauty equipment accessory on the market. The motor noise is low and the quality is good. According to the analysis of the use cases of major medical customers, there has been no motor damage in three years.
One-to-one refers to: The backrest adopts a pressure rod to lift, manually adjust the angle, and fix it at any angle. The entire bed is controlled by a motor to move up and down.
One to two means that the backrest adopts a motor to automatically adjust the angle, and the bed surface also uses the motor to control the overall height of the lift. Easy to adjust and save time.
Metal Base Electric Massage Table
Metal Base Electric Massage Table,Electric Mature Massage Tables,Metal Chassis Electric Massage Table,Metal Electric Massage Table
MING MEI ROYAL SPA FURNITURE , https://www.mingmeibeauty.com