Groove mixer component

The trough mixer is mainly composed of the following parts:

1, stirring reducer

The reducer is the main transmission structure of the mixer. It is located on the right side of the machine. During operation, the motor in the machine passes the V-belt drive worm and worm gear to drive the mixer at a speed of 1:40. The worm gear shaft is hollow and equipped with fixed keys, which can freely assemble and disassemble the stirring paddle. Two ring screws are mounted on the top of the reducer for assembly and disassembly and installation. The end cap is equipped with a screw for high-speed stirring paddle positioning, which has been adjusted at the factory, and generally does not need to be adjusted during use.

2, mixing tank

The mixing tank is U-shaped, made of stainless steel, equipped with a stirring paddle, which is placed on the mixing reducer and the dumping material 3, and the material reducer

The reversing reducer is used to control the positioning angle of the mixing tank. It is located on the left side of the machine. During operation, the motor in the frame passes the V-belt drive worm and worm wheel to drive the mixing tank to rotate within a certain angle range, so that the mixture can be mixed once. Pour out.

4, the base and motor device

The base is a whole structure, and the motor is mounted on the movable plate on both sides of the base. The upper and lower sides of the motor can be adjusted by the screw to make the V-belt get a certain tightness and maintain the transmission force.