How to use the gas shift oven

How to use the gas shift oven

Baanqi furnace is one of the common equipments in commercial kitchens. The product is made of stainless steel, and the surface is treated with non-stick coating. The structure is reasonable, luxurious and fashionable, easy to operate, and the work efficiency of the shifting furnace is high. It can be baked in the hour of 28-35 kilograms. It can be baked every 5 minutes. A 1500 gram cake is not adhered. It is economical and practical and widely used.

Baanqi furnace is one of the common equipments in commercial kitchens. The product is made of stainless steel, and the surface is treated with non-stick coating. The structure is reasonable, luxurious and fashionable, easy to operate, and the work efficiency of the shifting furnace is high. It can be baked for 28-35 kilograms per hour. It can be used to heat a 1500g cake every 5 minutes. It is economical and practical. It is widely used in factories, factories, mines, schools, restaurants, canteen processing departments and individual restaurants. , all kinds of noodles are baked.

How to use the gas shift oven:

1. Turn on the gas pipe and check if it is ready to be used.

2. Each control switch independently controls the corresponding seesaw part, and can use each switch to ignite and heat according to the use condition.

3. When heating, first open the gas regulating valve, press the switch that needs to be heated in front of the furnace body, and slowly rotate it counterclockwise until you hear a “click”, then let go, and in the raft and the furnace The gap between the gaps is observed to have ignited to ensure that the furnace has been set to fire before it can be used. If the stove is deactivated for a long time, or * it is used, it may not be fired at one time. Because there is air in the intake pipe of the furnace, it can be fired again according to the above method until it is hit.

4. After use, turn the switch on the front of the furnace clockwise until it hears a “click” and close the regulating valve of the canned gas.

5. When the front switch of the furnace body is turned to 90°, the firepower is large, and when it is greater than 90°, the firepower will gradually decrease.