What are the requirements for filling large drums of pure water production lines?

A full set of fully automatic production equipment for large barrels of pure water production line (ribper machine, rinsing, filling, capping three-in-one machine, capping machine, solid bottle conveying buffer system and post-packaging system).

Large barrels of pure water production line filling requirements

1. Prevent the filter material from entering the reverse osmosis device: Select a suitable filter water outlet device to prevent the filter from leaking sand and leaking activated carbon; select a suitable activated carbon to prevent powder removal during use.

2. The large-scale pure water production line with tap water as the water source sets up an independent water supply system, which can ensure the stable operation of the water supply system and reduce the instantaneous impact on the whole water supply pipe network when the RO system starts and stops. When the RO unit draws water directly from the raw water pipe network, high and low voltage protection facilities should be installed, as most of the water pipe network pressure fluctuates greatly.

3. The compatibility between the agent and the agent should be considered first, and then the compatibility of the agent with the film material should be considered. For example, coagulants, coagulants, bactericides, reducing agents and scale inhibitors are often used in RO systems. Since colloids in natural water are generally negatively charged, positively charged cationic coagulants are typically used.

In order to prevent fouling of the RO device, the inlet of the RO is almost always considered to be a measure of adding a scale inhibitor, and these scale inhibitors are almost all negatively charged. Therefore, the cationic coagulant should be prevented from reacting with the anionic scale inhibitor to prevent the colloidal compound formed by the reaction from depositing on the membrane surface.

Whether the large-barrel pure water production line can run normally for a long time is important for maintenance and careful maintenance of equipment, and the equipment is handy. Therefore, care should be taken not to damage the machine during the operation of the purified water equipment.