Characteristics and operation method of external pumping inflatable vacuum packaging machine

The external pumping type vacuum packaging machine adopts advanced microcomputer integrated circuit control, Chinese character explicit operation interface, adopts no chamber air nozzle mechanism, is not limited by the size of the vacuum chamber, and the machine integrates vacuum and air-filled packaging, and the application range is extremely wide. The externally pumped inflatable vacuum packaging machine is suitable for packaging of articles with low vacuum requirements and high aerated purity.

External pumping inflatable vacuum packaging machine features:

1. Full-featured, suitable for a variety of different packaging requirements, can be used for a single sealing process, can be used for vacuum packaging, can also be used for vacuum filling and filling with inert gas packaging.

2. The external pumping type vacuum packaging machine adopts automatic program control, and the processes of pumping, inflating (optional), sealing and cooling are completed at one time.

3. Adopting the double-nozzle structure without vacuum chamber, the pumping (inflating) nozzle will automatically withdraw from the packaging bag after completing the working procedure, and the sealing performance is good and the working efficiency is high.

4. The pumping time and heat sealing time are adjustable, which is suitable for the sealing of various film and composite film.

The manual operation method of the external pumping type vacuum packaging machine is: setting the working program, the machine enters the standby state, plugs the packaging bag to the air nozzle, and adjusts the two ends of the packaging bag to be aligned with the sealing line;

1 Step on the foot switch or press the start button, the pressure bar pulls down to press the bag mouth;

2 Let the object be close to the nozzle 3 - 5mm; (to achieve a good vacuum);

3Turn on the foot switch or press the start button to start vacuuming;

4 Step on the foot switch or press the start button to stop the vacuum and go to 5;

5 Inflation starts running according to the set time, the inflation is completed, go to 6;

6 heat seal starts running according to the set time, heat seal is completed, go to 7;

7 cooling starts running according to the set time, cooling is completed, turn 8;

8 The nozzle extends out according to the set time and enters the standby state.