Routine manual cutting and cleaning methods for eggplant seeds are labor-intensive and labor-intensive. Especially in the case of a large amount of eggplant, when the weather is not stable, it is not conducive to grab the sun. Artificially cut pods often have poor seed color, such as ashiness and dullness, affecting the appearance quality, and when pods are harvested, they are not easy to lick, and the loss of hauling is also high. In the production, the author explored a new method of threshing with a washing machine. Its advantages: First, processing personnel no longer use their fingers to dig seeds directly, greatly reducing the labor intensity, saving time and labor, work efficiency is 8-10 times the handcuffs method. This method does not affect the normal germination traits of seeds, does not waste seeds, and has a high recovery rate. The second is that the seed surface is clean, the color is positive, the glossiness is obviously improved, and the appearance of the product is excellent. The washing process is as follows: Electromechanical preparation: A normal functioning washing machine, power inlet board and rinse water. Add water to about 70% of the highest water level in the tank. Fruit slicing: Select the whole fruit without pests and post-ripenings and slice it horizontally on a wooden mat, about 1.8cm thick. Cut the seedless small end without cutting. The slicing amount should be used as it is cut, and it should be used as cut. Avoid backlogging and discolor the seeds. Turn off the power: After turning on the power and turning on the machine, after using the strong wash water to tumble, you can add the fruit-fruit slices without soil pollution, and add 10-13kg as appropriate, taking care that the height of the liquid in the tank does not exceed the maximum water level, and the threshing time 15-20 minutes, observe that most of the slices are broken, and the seeds are separated from the pulp and can be shut down. Seed rinsing: Dump the flesh seeds mixture into the pot, add water, dilute and stir, and after the seeds are settled for a while, use bamboo to remove the above pieces of seedless pulp, then slowly pour out the suspended water and leave the seeds. Rinsing with water is repeated until the seeds are cleaned without any impurities. Then, the washed wet seeds are put into the cloth bag, and the excess water is spun off, and the product is promptly dried on a clean colorless cloth sheet or a clean fine straw mat, and is frequently stirred to make the moisture content of the seeds up to the standard. Dryness. China Agricultural Network Editor
An electrosurgical pencil, also known as an electrocautery pencil or diathermy pencil, is a medical device used in surgical procedures to cut, coagulate, or vaporize tissue. It is typically handheld and resembles a pencil in shape, with switch button on the handle that activates the electrical current.
The electrosurgical pencil works by delivering a high-frequency electrical current to the tissue through a wire electrode. These current heats up the tissue, causing it to either cut or coagulate, depending on the mode that been selected.
ESU pencil,Monopolar cautery pencil,Diathermy pencil,Bovie pencil
2 MEDS TECHONOLOGY CO.,LTD , https://www.2-meds.com