Tealth 4: 1 Endo Reciprocating Reduction Contra-Angle Dental Handpiece

  • Model NO.: 3040CH(R)
  • Certification: TUV, ISO, CE
  • Light Way: Without Light
  • Usage Times: Non-Disposable
  • Loading Way: Gland Type
  • Exhaust Way: Internal Exhaust
  • Connection: Without Quick Connector
  • Gear Ratio: 4:1 Reduciton
  • Trademark: TEALTH
  • Specification: Aluminum, stainless steel
  • HS Code: 90184100
  • Condition: New
  • Material: Stainless Steel
  • Water Way: Inner Channel
  • Application: Adult, Child
  • Head Diameter: Middle Head
  • Number of Holes: Two Holes
  • Rotating Speed: Low-Speed Handpiece
  • Noise: Less Than 70dB
  • Transport Package: Plastic Box
  • Origin: China
3020CH-401R 4:1 reciprocating contra angle
Model: 3040CH(R)
Tealth 4: 1 Endo Reciprocating Reduction Contra-Angle Dental Handpiece

Features:
1. more big torque supply due to 4:1 reduction speeder 
2. water/ air separated supply , make perfect spray for operation. 
3. skid resitance sleeve, FG/CA exchangable head, muti-function.
4. it is used for endodontic treatment. 
Tealth 4: 1 Endo Reciprocating Reduction Contra-Angle Dental Handpiece
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.

Tealth 4: 1 Endo Reciprocating Reduction Contra-Angle Dental Handpiece

Sofa

The sofa suitable for the elderly occupies an important position in the elderly furniture. It uses the combination of solid wood and fabric technology to achieve the most comfortable degree; The supporting parts, such as sofa feet and armrests, are made of solid wood. Generally, ash, oak, rubber, ash, pine, beech, walnut, teak, fir, camphor, elm, nanmu, cherry, maple, etc. are selected; The seat and backrest are made of high-density sponge with a density of 45, and the hardness should be 35 (high-density sponge is generally ≥ 45, the higher the density of sponge, the better the rebound performance; sofa hardness is generally 35, the higher the hardness, the better the compression ability), to prevent bedsore, and reduce the discomfort of the elderly waist, and the edge is chamfered into a round corner to prevent collision injury and meet the safety requirements; Protect waist and neck, meet ergonomic requirements and increase comfort. Proper height is conducive to use and support


TRUTECH CO., LTD. is an enterprise specializing in the research, development, production and sales of professional OTC products.The main products include shower chairs, armrests, toilet racks and toilet armrests, bedside armrests, elderly chairs and sofas, crutches and walking aids, knee pads, waist supports and other equipment.

Sofa,Adjustable Elderly Sofa,Recliner Sofa Leather,Sofa Chair For Elderly

TRUTECH CO., LTD. , https://www.wxgrabbar.com